Textured door stop with unique linear knurled design. It offers 2 installation options: by adhesive or by screw (includes expansion plug and screw).
Designed and manufactured by Herrajes EVI with solid bars, obtaining a robust and high quality doorstop. To protect doors and prevent damage to walls, radiators or any other element of the room.
This is a very original, elegant and modern doorstop. The measures of the adhesive stopper are as follows: 28 millimeters in diameter and 28 millimeters high.
Available in the following finishes:
- White lacquered stainless steel and white silicone rubber.
- Black lacquered stainless steel and black silicone rubber.
- Matt satin brass and white silicone rubber.
In addition, we recommend visiting our textured door stops with cross pattern: Adhesive Door Stop, Diamond Knurled, 198.
Install your door stop with adhesive:
- Choose the place of installation.
- Clean the surface with a damp cloth, making sure that no residue remains. Then dry thoroughly.
- We recommend heating the adhesive pad slightly with a hair dryer, without removing the protective film of the adhesive, to enhance its bonding capacity.
- Remove the protective film. Do not touch the adhesive with your hands, as it could lose its adhesion properties.
- Install the doorstop in the desired location and press firmly for 1 minute.
- After installation, wait 24 hours for the adhesive to set so that it can perform its function as a stopper correctly.
*We do not recommend the installation of adhesive door stoppers on rough floors, in that case we recommend the stoppers with screw fixation.
**We recommend not to move the stopper once installed. The adhesive may lose adhesion if the stop is handled once installed.
Install your screw-on stop:
- Choose the installation site and mark the location to drill the hole.
- Drill the hole with the appropriate tool.
- Clean the remains of the material with a damp cloth.
- Place the dowel and screw the base of the stop to the floor.
- Screw the stop body to the base.
➜ Discover our replacement rubber packs for this model here.
