It is a decorative door stop to fix on the floor. Manufactured by Herrajes EVI with solid brass bars for durability and quality. Designed with a protective silicone rubber to cushion and prevent damage to your walls and doors.
Thanks to its dual installation, you can install it as you prefer: with a 3M double-sided adhesive or using screw to fix the stop to the floor. In this case, plug and screw are included.
Dimensions of the stop: 24 millimeters in diameter, 21 millimeters in height and 28 millimeters in diameter including the protective rubber.
Several finishes and models of the doorstop are offered to achieve a decorative space full of personality in your home. The different models are as follows:
– Matt satin brass with black silicone rubber.
– Matt satin brass with white silicone rubber.
– Brass antique leather finish with black silicone rubber.
How to install your doorstop:
1. Choose the place of installation*.
2. Clean the surface with a damp cloth, making sure that no residue is left.
3. Without removing the protective film of the adhesive, slightly heat the adhesive pad of the stopper with a hairdryer to increase its adhesion capacity.
4. Remove the protective film without touching the adhesive with your hands, as it may lose its adhesion properties.
5. Install the stopper in the desired location and press firmly for 1 minute.
6. After installation, wait 24 hours for the adhesive to set so that it can perform its function as a stopper correctly.
*We do not recommend the installation of the adhesive stoppers on rough floors or floors finished with special paints, in this case we recommend the stoppers with screw fixing.
**In the case of screw fixing, follow the first two steps and drill the hole and then screw on the threaded base. In this way it can be used immediately after installation.
