As usual in Evi’s catalogue, this model of bathroom hanger is manufactured with top quality materials, stainless steel and brass. Its rustproof properties make it suitable for use in humid environments such as bathrooms or outdoors.
It has a double installation system. For those who do not want to drill holes, they can install the hanger with its 3M double-sided adhesive. This installation makes it able to withstand loads of up to 2kg. On the other hand, it can also be installed with a screw. The screw is fixed to the base and then screwed into the hanger body. A stronger fixing capable of supporting up to 15 kilos, ideal for hanging heavy coats. Both fixings included.
In Herrajes EVI we design and manufacture the products with high quality materials and providing a modern and handmade style at the same time. The dimensions are as follows: 45mm diameter at the base, 45mm length and 30mm at the head.
The hanger is available in the following finishes:
Matt stainless steel
White lacquered stainless steel
Black lacquered stainless steel
Matt brass
Aged brass leather
Rustic brass
Install the EVI wall hanger with screw:
1. Prepare the screw and dowel and decide where to place the hanger.
2. Using a drill, drill the hole in the chosen spot.
3. Place the dowel and screw the base to the wall.
4. Finally, screw the top of the hanger to the base.
Install the EVI wall hanger with adhesive:
1. Choose the installation method that best suits the surface.
2. Clean the surface and screw the base or fix the hanger using the adhesive.
3. For adhesive fixing, slightly heat the adhesive, do not touch it and press for at least 60 seconds.
Remember: The adhesive becomes fully functional after 48 hours. On rough walls or walls with special paints, we recommend fixing with screws.
