This is a wall door stop. Installation at your choice: screwing the base to the wall or with a 3M double-sided adhesive pad. National manufacture with first quality materials, brass and stainless steel to obtain a durable stop with high resistance to corrosion.
Thanks to its internal thread, you can adjust the distance from the wall to the door to your preference to save objects such as a radiator or a hanger. The stop has a minimum length of 87 millimeters, a maximum length of 135 millimeters and a base of 45 millimeters.
Created with a protective silicone rubber to prevent damage to the walls and doors of your home. Available in several models and finishes to match the furniture in your space. They are as follows:
– Matte satin stainless steel with black silicone rubber.
– Matt satin stainless steel with white silicone rubber.
– White lacquered stainless steel with white silicone rubber.
– Black lacquered stainless steel with black silicone rubber.
– Matt satin brass with black silicone rubber (white included).
– Aged leather finish brass with black silicone rubber (white included).
Install your stop on the wall:
- Choose the installation location*.
- Clean the wall with a damp cloth, either with water or alcohol depending on the wall material.
- Slightly heat the adhesive to increase its bonding capacity**.
- Remove the protective plastic (DO NOT touch the adhesive with your hands, it could lose its adhesion capacity).
- Install the stopper in the desired location and press for 1 minute (we recommend NOT to move the stopper once installed, we DO NOT ensure a strong fixation in successive installations).
- After installation wait 24 hours until it can begin to fulfill its function.
*We do not recommend to install the adhesive bumpers on rough walls or walls with special paints, in this case we recommend the bumpers with screw fixation.
**In case of screw fixing, follow the first step and drill the hole and then screw the threaded base. In this way it could be used immediately after installation.
