Door stops for wall mounting. This type of door stop is placed at the height of the door handle to protect the wall from the impact of the door. It has a minimalist style, integrating into the wall or with the door hardware.
Two types of installation are available. With the 3M adhesive pad, recommended for smooth walls or walls that do not have special paints. On the other hand, it can also be installed with a screw, removing the rubber from the head and screwing it to the wall.
Evi Herrajes manufactures with the best materials, to obtain durable and high-quality doorstops. This is a discreet and minimalist stopper. Available in various materials and finishes.
Available finishes:
- Satin matt stainless steel and black natural silicone rubber
- Satin matt stainless steel and white natural silicone rubber
- White lacquered stainless steel and white natural silicone rubber
- Black lacquered stainless steel and black natural silicone rubber
- Satin matt brass and black natural silicone rubber
- Satin matt brass and white natural silicone rubber
- Antique leather finish brass and black silicone rubber
- Rustic finish brass and black silicone rubber
The dimensions of the doorstop are as follows: 24 millimetres in diameter and 14 millimetres in length.
How to install the doorstop:
1. Choose the place of installation*.
2. Clean the surface with a damp cloth, making sure that there is no residue.
3. Without removing the protective film of the adhesive, slightly heat the adhesive pad of the doorstop with a hairdryer to increase its adhesion capacity.
4. Remove the protective film without touching the adhesive with your hands, as it may lose its adhesion properties.
5. Install the doorstop in the desired location and press firmly for 1 minute.** 6.
6. After installation, wait 24 hours to allow the adhesive to set so that it can perform its function as a stopper correctly.
*We do not recommend installing the adhesive stops on rough walls or walls finished with special paints, in this case we recommend screw installation.
**In the case of screw fixing, follow the first two steps and drill the hole and then screw in the stop. In this way it can be used immediately after installation.
